Honda Logo
Search Search
HomeMotorcyclesPower EquipmentMarinePWCOwning a HondaShopAbout Honda
Product RangeProducts Powered By HondaFAQsPress ReleasesTechnologyDealer Locator
General Information
Brushcutters
Engines
Generators
Generator Selector
Lawnmowers
Pumps
Tillers
There are hundreds of Honda Dealers located across Australia. Locate one now.
Do you have a question or comment on our product range or service?

BrushcutterNot sure what brushcutter to buy?

For homeowner and light-to-medium commercial lawn trimming needs, the Honda UMS 425 or UMK 425 trimmers provide ample power and torque to handle demanding applications. Thanks to Honda's mini 4-stroke technology, the GX25 (25cc) engine will not "bog down" or stall even in the thickest grass like some other gas trimmers will.

If you’re a commercial user or homeowner whose requirements include brushcutting along with trimming, the Honda UMK 435 trimmer offers the ultimate hand-held solution for heavy-duty trimming and brush removal.
The “LN”  model trimmer is a standard "loop" handle design and the "UN" model features a commercial "bike" handle design for the serious professional whose needs range from regular trimming to clearing heavy brush, saplings and small trees.

How do I wind the cutting line on my straight shaft brushcutter? 

Proceed with CAUTION.

Stop the engine and confirm the head is stopped when you do any service on the head. Make sure the cover is secured exactly to the head. Improper assembly causes dispersing of itself and inner parts of the head when rotating it.

  • Pull off the cover from the housing. Pull up the cover, pressing two latches which are located opposite each other on the side of the housing. (Fig 4)

  • Take out spool from the housing.

  • Fold 18ft.of cutting line in two halves leaving one half 3 inches longer than the other.

  • Hook the folding point of the line on the slit of the spool centre flange and align both halves into each gutter in the direction shown by LH arrows on one of the spool outer flanges. (Fig 5)

  • Wind the lines up firmly to the direction. (Fig 6)

  • Hook the lines to the line holding notches on one of the outer flanges. Leave 4-6 inches of the lines from the notches (do not let the lines loosen). (Fig 7)

  • A spring should stay in the housing hub. Put the spool onto the housing, positioning it so it can freely move up and down against the spring tension.

  • Put the lines into the eyelets through the slits located on the eyelets. (Fig 8)

  • Put the cover back onto the housing aligning the latches and windows on the cover. (Fig 9)

  • Make sure the latches are fully spread in each window. (Fig 10)
   Fig 4

Fig 6

Fig 8		   Fig 5

Fig 7

null

Fig 10  Brushcutter Care
Click here For instructions on Bump Head cutter line refilling for the bent shaft linetrimmer 

Click here For the instruction manual for the Diatop Bump 4, Trimmer Head

Brushcutter Care 

Evenly balance and distribute the weight of the brushcutter by correctly setting up the harness.

Always use the right protective gear – long pants, heavy boots, gloves and eye goggles.
Print Email Friend
Contact Honda MPE Terms and conditions Privacy Policy Sitemap Feedback eNews Subscription